Yealink SIP-T46G Administrator's Manual page 181

Procedure
SNMP can be configured using the configuration files or locally.
Configuration File
Local
To configure SNMP via web user interface:
1.
2.
3.
4.
5.
6.
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
<y000000000028>.cfg
Web User Interface
Click on Network->Advanced.
In the SNMP block, select the desired value from the pull-down list of Active.
Enter the desired port in the Port field.
Enter the address(es) (IPv4, IPv6 or domain name) of the SNMP server in the
Trusted Address field.
Multiple addresses are separated by space.
Click Confirm to accept the change.
A dialog box pops up to prompt that the settings will take effect after reboot.
Click OK to reboot the IP phone.
Configuring Advanced Features
Configure SNMP on the IP
phone.
For more information, refer to
SNMP on page 322.
Configure SNMP .
Navigate to:
http://<phoneIPAddress>/servl
et?p=network-adv&q=load
169