Yealink SIP-T46G Administrator's Manual page 335

Format
Default Value
Range
Example
Parameter-
network.snmp.port
Description
Format
Default Value
Range
Example
Parameter-
network.snmp.trust_ip
Description
Format
Default Value
Range
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
Boolean
1
0-Disabled
1-Enabled
network.snmp.enable = 0
Configuration File
<y000000000028>.cfg
Specifies the port used for SNMP
communication.
Note: If you change this parameter, the IP
phone will reboot to make the change take
effect.
Integer
161
0 to 65535
network.snmp.port = 1008
Configuration File
<y000000000028>.cfg
Specifies the SNMP server addresses from
which GET requests will be accepted.
You can specify one or more addresses,
multiple addresses are separated by
space.
If the value is set to ―0.0.0.0‖, the IP phone
can accept and handle GET requests from
any IP address.
If the value is left blank, the IP phone cannot
receive or handle any GET request.
Note: If you change this parameter, the IP
phone will reboot to make the change take
effect.
IP Address (IPv4 or IPv6) or Domain Name
0.0.0.0
At most 255 characters
Appendix
323