Yealink SIP-T46G Administrator's Manual page 132

Administrator's Guide for SIP-T46G IP Phone
Configured tones can be heard on the IP phone for the following conditions:
Dial
Ring Back
Busy
Congestion
Call Waiting
Dial Recall
Record
Info
Stutter
Message
Auto Answer
Procedure
Tones can be configured using the configuration files or locally.
Configuration File
Local
To configure tones via web user interface:
1.
2.
120
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
Condition
When in the pre-dialing interface
Ring-back tone
When the callee is busy
When the network is congested
Call waiting tone
Call hold tone
When recording a call
When receiving a special message
When receiving a voice mail
When receiving a text message
When automatically answering a call
<y000000000028>.cfg
Web User Interface
Click on Settings->Tones.
Select the desired type from the pull-down list of Select Country.
Description
Configure the tones for the IP
phone.
For more information, refer to
Tones on page 294.
Configure the tones for the IP
phone.
Navigate to:
http://<phoneIPAddress>/servl
et?p=settings-tones&q=load