Group Call Pickup - Yealink SIP-T46G Administrator's Manual

Administrator's Guide for SIP-T46G IP Phone
4.
5.
To configure a directed pickup key via phone user interface:
1.
2.
3.
4.
5.
6.
7.
8.
Group call pickup is used for picking up incoming calls within a pre-defined group. If
there are many incoming calls at the same time, the user will pick up the first incoming
call. The user can pick up the incoming call using a group pickup key or the GPickup soft
key. This feature depends on support from a SIP server. Group call pickup is
implemented by dialing the group call pickup code. The group call pickup code can be
configured on a phone or per-account basis.
94
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
Enter the directed call pickup code in the Directed Call Pickup Code field.
Click Confirm to accept the change.
Press Menu->Call Feature->DSS Keys.
Select the desired DSS key.
Press Press Press or or or , or the , or the Switch soft key to select Key Event from the Type field. , or the
Press Press Press or or or , or the Switch soft key to select Pick Up from the Key Event field. , or the , or the
Press Press Press or or or , or the , or the , or the Switch soft key to select the desired line from the Account
ID field.
(Optional.) Enter the string that will appear on the LCD screen in the Label field.
Enter the directed call pickup code followed by the specific extension in the Value
field.
Press the Save soft key to accept the change.