Yealink SIP-T46G Administrator's Manual page 185

3.
4.
To configure the 802.1X via phone user interface after:
1.
2.
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
1) Enter the username for authentication in the Identity field.
2) Enter the password for authentication in the MD5 Password field.
3) In the CA Certificate field, click Browse to select the desired certificate
(*.pem,*.crt, *.cer or *.der) from your local system.
4) Click Upload to upload the certificate.
Click Confirm to accept the change.
A dialog box pops up to prompt that the settings will take effect after reboot.
Click OK to reboot the IP phone.
Press Menu->Advanced (password: admin) ->Network->802.1x.
Press Press or , or the Switch soft key to select the desired value from the 802.1x
Mode field.
a) If you select EAP-MD5:
1) Enter the username for authentication in the Identity field.
2) Enter the password for authentication in the Password field.
b) If you select EAP-TLS:
1) Enter the username for authentication in the Identity field.
2) Leave the Password field blank.
c) If you select PEAP-MSCHAPV2:
1) Enter the username for authentication in the Identity field.
2) Enter the password for authentication in the Password field.
d) If you select EAP-TTLS:
Configuring Advanced Features
173