Resource Files - Yealink SIP-T46G Administrator's Manual

When configuring some features, you may need to upload resource files to the IP phone.
The resources files can be local contact directory, remote phonebook and so on. Ask the
Yealink field application engineer for the resource file templates. If the resource file is to
be used for all IP phones of the same model, the access URL of the resource file is best
specified in the <y000000000028>.cfg file. However, if you want to specify the desired
phone to use the resource file, the access URL of the resource file should be specified in
the <MAC>.cfg file.
This chapter provides the detailed information on how to customize the following
resource files and specify the access URL:






You can create multiple replace rules using the replace rule template. After preparing
the replace rule template, you need to place the replace rule template to the root
directory of the provisioning server and specify the access URL in the configuration files.
When editing a replace rule template, remember the following:





VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
Replace Rule Template
Dial-now Template
Softkey Layout Template
Local Contact File
Remote XML Phonebook
Specifying the Access URL of Resource Files
<DialRule> indicates the start of a template and </DialRule> indicates the end of
a template.
Create replace rules between <DialRule> and </DialRule>.
When specifying the desired line(s) to apply the replace rule, the valid values are 0
and line IDs. The digit 0 stands for all lines, multiple line IDs are separated by
comma.
At most 20 replace rules can be added to the IP phone.
The expression syntax in the replace rule template is the same as introduced in the
section Creating Dial Plan on page 23.

Resource Files

209