Message waiting indicator on the idle screen indicates that one or more voice messages are waiting
at the message center. The power indicator LED slowly flashes red.
1. Press
or the
soft key.
2. Follow the voice prompts to listen to your voice messages.
1. Press the
soft key when the phone is idle, press
2. Select an entry from the list, you can do the following:
Press the
soft key to place a call.
Press the
soft key to delete the entry from the list.
If you press the
soft key, you can also do the following:
Select
to view detailed information about the entry.
Select
to add the entry to the local directory.
Select
to add the entry to the blacklist.
Select
to delete all entries from the list.
1. Press the
soft key when the phone is idle, and then select the desired group.
2. Press the
soft key to add a contact.
3. Enter a unique contact name in the
4. Press the
soft key to accept the change.
1. Press the
soft key when the phone is idle, and then select the desired group.
2. Press
or
to select the desired contact, press the
from the prompt list.
3. Edit the contact information.
4. Press the
soft key to accept the change.
1. Press the
soft key when the phone is idle, and then select the desired group.
2. Press
or
to select the desired contact, press the
from the prompt list.
3. Press the
soft key when the LCD screen prompts "Delete selected contact?".
You can add contacts from the call history easily. For more information, refer to
Press
during a call to adjust the receiver volume of the handset/speakerphone/
headset.
Press
when the phone is idle to adjust the ringer volume.
1. Press the
soft key when the phone is idle, and then select
2. Press
or
to select the desired ring tone.
3. Press the
soft key to accept the change.
For more information, refer to the User Guide available online:
c c
Copyright
2014 YEALINK NETWORK TECHNOLOGY CO.,LTD.
or
to scroll through the list.
field and contact numbers in the corresponding fields.
soft key and then select
soft key and then select
above.
->
->
.
www.yealink.com
(V72.4)
Applies to firmware version 72.1 or later.