Yealink SIP-T46G Administrator's Manual page 138

Administrator's Guide for SIP-T46G IP Phone
To configure an LDAP key via phone user interface:
1.
2.
3.
4.
5.
6.
Busy Lamp Field (BLF) is used to monitor a specific user for status changes on the IP
phones. For example, you can configure a BLF key on a supervisor's phone for
monitoring the status of a user's phone (busy or idle). When the user makes a call, a
busy indicator on the supervisor's phone shows that the user's phone is in use and busy.
Visual Alert and Audio Alert for BLF Pickup
The BLF pickup feature allows supervisor to pick up the incoming call of the monitored
user. The visual alert and audio alert for BLF pickup features allow the supervisor's
phone to play an alert tone and display a visual prompt (e.g., ―6001<-6002‖, 6001 is the
monitored extension and receives an incoming call from 6002) when the monitored user
receives an incoming call. In addition to BLF key, the visual alert for BLF pickup feature
also enables the supervisor to pick up the incoming call of the monitored user by
pressing the Pickup soft key directly. The directed call pickup code must be configured
in advance. For more information on how to configure the directed call pickup code for
the Pickup soft key, refer to
LED Off in Idle
The LED off in idle feature defines two flashing methods for the BLF key LED. The BLF key
LED flashes as below:
Line key LED (configured as BLF key when LED Off in Idle is disabled)
Solid green
Solid red
Fast flashing red
Off
126
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
Press Menu->Call Feature->DSS Keys.
Select the desired DSS key.
Press or , or the Switch soft key to select Key Event from the Type field. , or the
Press Press or , or the , or the Switch soft key to select LDAP from the Key Event field.
(Optional.) Enter the string that will appear on the LCD screen in the Label field.
Press the Save soft key to accept the change.
Directed Call Pickup
LED Status
The monitored user is idle.
The monitored user is busy.
The call is parked against the monitored user's phone
number.
The monitored user receives an incoming call.
The monitored user does not exist.
on page 91.
Description