Yealink SIP-T46G Administrator's Manual page 238

Administrator's Guide for SIP-T46G IP Phone
the server simultaneously. Then the server configures the Always Forward feature as
configured on the phone side. Hence, the server is able to get the right status of the
extension.
Do one of the following:


Reset your phone to factory configurations after you have tried almost all
troubleshooting suggestions but do not resolve the problem. You need to note that all
customized settings will be overwritten after resetting.
starts up successfully.
To reset your phone via web user interface:
1.
2.
3.
Note
Reset of the phone may take a few minutes. Do not power off until the phone starts up
successfully.
226
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
Try to set another available IP address for the IP phone.
Check the configuration of the network via phone user interface at the path
Menu->Advanced->Network->WAN Port. If Static IP Client is selected, select
DHCP IP Client instead.
Click on Settings->Upgrade.
Click Reset in the Reset to Factory Settings field.
The web user interface prompts the message ―Do you want to reset to factory?‖.
Click OK to confirm the resetting.
The phone will be reset to factory sucessfully after startup.
Do not power off until the phone