Yealink SIP-T46G Administrator's Manual page 21

AC Power
To connect the AC power and network:
1.
2.
Power over Ethernet
Using a regular Ethernet cable, the IP phones can be powered from a PoE (IEEE 802.3af)
compliant switch or hub.
To connect the PoE:
1.
Note
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
Connect the DC plug of the power adapter to the DC5V port on the IP phones and
connect the other end of the power adapter into an electrical power outlet.
Connect the supplied Ethernet cable between the Internet port on the IP phones
and the Internet port in your network or switch/hub device port.
Connect the Ethernet cable between the Internet port on the IP phones and an
available port on the in-line power switch/hub.
If in-line power is provided, you do not need to connect the AC adapter. Make sure the
Ethernet cable and switch/hub is PoE compliant.
The IP phones can also share the network with other network devices such as a PC
(personal computer). It is an optional connection.
Important! Do not unplug or remove power while the IP phones are updating firmware
and configurations.
Getting Started
9