Message Waiting Control - Panasonic KX-TD1232 Program Manual
Digital super hybrid system
Hide thumbs
Also See for KX-TD1232:
- User manual (226 pages) ,
- Installation manual (160 pages) ,
- Programming manual (443 pages)
Table of Contents
Advertisement
[130] Message Waiting Control
Description
Assigns the data ports which communicate with the message waiting lamp adaptor (KX-
TD194).
Selection
• Unit (TD194) number:
KX-TD816 — 1
KX-TD1232 — 1 or 2 (for Master), 4 or 5 (for Slave)
• Jack number:
KX-TD816 — 02 through 16
KX-TD1232 — 02 through 64
Default
All units — Not stored
Programming
1.
Enter 130.
Display: 130 MW CONTROL
2.
Press NEXT.
Display: MW UNIT NO?
3.
Enter a unit number.
To enter unit number 1, you can also press NEXT.
Display example: Unit:1 Jack
4.
Enter a jack number.
Display example: Unit:1 Jack:05
5.
Press STORE.
6.
To program another unit, press NEXT or PREV, or SELECT and the desired unit number.
7.
Repeat steps 4 and 5.
8.
Press END.
Conditions
• The following jacks are not available for this assignment.
Jack 01
The jack for the manager extension
Jacks assigned to voice mail ports
Jacks assigned to DSS consoles and paired telephones
Jacks already assigned to the message waiting adaptor unit
Programming Guide
General Programming
105
Advertisement
Table of Contents
