Ars Leading Digit Entry For Plans 1 Through 8 - Panasonic KX-TD1232 Program Manual

[314-321] ARS Leading Digit Entry for Plans 1 through 8

Description
By entering numbers into each leading digit plan (programs below) you are starting the process
to determine which outside line group will be used to route the call.
Program
Plan
These eight plans are used to analyze the number which the user dials and decide the route plan
for the call. If the user-dialed number is registered in Plan 1, then Routing Plan 1 is selected
for the call. Automatic Route Selection (ARS) Leading Digit Entry for Plans 1 through 8 match
ARS Routing Plans 1 through 8 (programs [322] through [329]) respectively.
Selection
• Location number: 001 through 100
• Leading digit number: 10 digits (max.)
Default
All locations — Not stored.
Programming
1.
Enter a program address (314 through 321).
Display example: 314 ARS LEAD D-1
2. Press NEXT.
Display: Location NO?
3.
Enter a location number.
To enter location number 001, you can also press NEXT.
Display example: 001:Not Stored
4. Enter a leading digit number.
To delete the current entry, press CLEAR.
To change the current entry, press CLEAR and enter the new number.
5.
Press STORE.
6.
To program another location, press NEXT or PREV, or SELECT and the desired location
number.
7.
Repeat steps 4 through 6.
8.
Press END.
Programming Guide
[314] [315] [316]
1 2 3
[317] [318] [319]
4 5 6
General Programming
[320] [321]
7 8
155