Panasonic KX-TD1232 Program Manual page 79

Display example: RBT :1
3.
Enter a DTMF signal number.
To delete the current entry, press CLEAR.
To change the current entry, press CLEAR and enter the new number.
4.
Press STORE.
5.
To program another selection, keep pressing NEXT or PREV until the desired selection is
displayed.
6.
Repeat steps 3 through 5.
7.
Press END.
Conditions
• A DTMF signal number can have a maximum of three digits, consisting of 0 through 9, ,
# and PAUSE.
• The DTMF signals are sent to the extensions in the extension group that is assigned as
"VM" or "AA" in program [106] Station Hunting Type.
Features Guide References
Voice Mail Integration
Programming Guide
General Programming
79