Panasonic KX-TD1232 Program Manual page 185

extension group(s) in program [813] Floating Number Assignment. You cannot assign the
floating number of the modem.
• To assign all outside line groups to one selection, press the
display shows the contents programmed for outside line group 1.
• Program [401] Outside Line Group Assignment is used to assign each outside line to an
outside line group.
• For ISDN lines, the outside lines which correspond to the ISDN port number should have
the same IRNA destination.
<Example>
When a KX-TD386 is installed, outside line numbers 1 and 2 which correspond to ISDN
port number 1 should have the same IRNA destination.
Outside ISDN Port No.
Line
Master
No.
1, 2 1
3, 4 2
5, 6 3
7, 8 4
9, 10 5
11, 12 6
Features Guide References
Intercept Routing
Available for the KX-TD1232 only.
*1
Programming Guide
KX-TD816
KX- KX-
TD382 TD384 /
Slave
KX-
TD284
7 - Jack 1
8 - Jack 2
9 Jack 1 Jack 3
10 Jack 2 Jack 4
11 -
12 -
key in step 3. In this case, the
KX- KX-
TD386 TD382
Jack 1 -
Jack 2 -
Jack 3 -
Jack 4 -
- - Jack 1
- - Jack 2
General Programming
KX-TD1232
KX- KX-
TD384 / TD386
KX-
TD284
- Jack 1
- Jack 2
Jack 1 Jack 3
Jack 2 Jack 4
Jack 3 Jack 5
Jack 4 Jack 6
185