T1 Answer Wait Timer - Panasonic KX-TD1232 Program Manual

[722] T1 Answer Wait Timer

Description
Assigns an automatic disconnect timer to stop making a call on TIE / DID line, if the called
party does not answer.
This program is available for the KX-TD1232 only.
Selection
• Outside (CO) line number:
25 through 48,
• 0 / 1 / 2 / 3 / 4 (minutes)
Default
All outside lines — 1 min
Programming
1.
Enter 722.
Display: 722 ANSWER WAIT
2. Press NEXT.
Display: CO Line NO?
3.
Enter an outside line number.
To enter an outside line number 25, you can also press NEXT.
Display example: CO Line NO? 25
4. Press NEXT.
Display example: CO25:1min
5.
Keep pressing SELECT until the desired selection is displayed.
Display example: CO25:3min
6.
Press STORE.
7.
To program another outside line, press NEXT or PREV, or SELECT and the desired
outside line number.
8. Repeat steps 4 through 6.
9.
Press END.
Conditions
Available for a channel assigned TIE / DID in program [700] T1 Channel Assignment
Features Guide References
Direct Inward Dialing (DID)
Programming Guide
( = all outside lines from 25 to 48)
General Programming
323