Isdn Class Of Service - Panasonic KX-TD1232 Program Manual

General Programming

[613] ISDN Class of Service

Description
Programs a Class of Service (COS) number for each ISDN extension port. The COS
determines the call handling abilities of each port.
Selection
• Port number:
KX-TD816 — 01 through 04,
KX-TD1232 — 01 through 12,
• COS number: 1 through 8
Default
All ports — COS 1
Programming
1.
Enter 613.
Display: 613 ISDN COS #
2. Press NEXT.
Display: Port NO?
3.
Enter a port number.
To enter port number 01, you can also press NEXT.
Display example: #01:COS1
4. Enter a COS number.
To change the current entry, enter the new number.
5.
Press STORE.
6.
To program another port, press NEXT or PREV, or SELECT and the desired port
number.
7. Repeat steps 4 through 6.
8.
Press END.
Conditions
• Port numbers 01 through 06 are for the Master System and 07 through 12 are for the Slave,
if available.
• Refer to program [423] for the list of the ISDN port numbers and their corresponding jack
numbers.
• There is a maximum of eight Classes of Services. Each ISDN extension must be assigned
to a Class of Service and is subject to the COS Programming for programs [500] through
[510] and [991].
284
( =all ports)
( =all ports)
Programming Guide