Panasonic KX-TD1232 Program Manual page 24

General Programming Instructions
Sample of Description
6. To program another speed dial
number, press NEXT or
PREV, or SELECT and the
desired speed dial number .
7. Repeat steps 4 through 6.
(17)
8. Press END.
(18)
Conditions • Each speed dial number has a
maximum of 24 digits. The valid
characters are 0 through 9, the
# keys, and the FLASH or FLASH /
RCL, PAUSE, SECRET and –
(hyphen) buttons.
Features Guide References
Special Display Features – Call Directory
System Speed Dialing
Program Address
[0XX] Manager Programming
[1XX] System Programming
[2XX] Timer Programming
[3XX] TRS / ARS Programming
[4XX] Outside Line Programming
24
(15)
(16)
and
(19)
Programming Structure
Programming Group
Explanation
(15) Select the best way for you to store another speed
dial number. Pressing the NEXT / PREV allows
you to select the next higher / lower speed dial
number. You can also keep pressing them until the
desired one is displayed. If you press SELECT
and the desired speed dial number, the selected
code is displayed.
(16) You can continue to program another entry.
(17) After you have stored all your entries, finish this
program by pressing END. After pressing END
you can go to any program address you desire.
You can return to the Initial Message mode any
time by pressing END.
To go to the next lager program address, do not
press END but press Soft 1 (SKP+) or
VOLUME .
To go to the next smaller program address, do not
press END but press SHIFT + Soft 1 (SKP-) or
VOLUME .
(18) Tells you what you should notice or consider when
doing the programming.
(19) Lists all of the features related to the
programming. These features are described in
Section 3.
Description
These programs may be accessed by the system
manager of the customer to meet frequent changes
requested by the customer.
Entire system programming.
Flexible system timer setting.
Assignment of Toll Restriction and Automatic
Route Selection (ARS).
Setting of outside line and outside line group values.
Programming Guide