Panasonic KX-TD1232 Program Manual page 367

Area Bit
06 1 Determines whether the account code is
printed out or not (shown in dot) in the
SMDR.
3, 2 Reserved
4 Enables or disables sending outside
(CO) line access code "9" to a TIE line.
When you dial outside line access code
"9" and the outside line is busy, the
system can automatically send outside
line access code "9" to a TIE line so that
you can access the outside line through
another PBX.
5 Determines whether to printout the last
entered or the first entered account code
in the SMDR.
6 When an incoming call is received in a
Hunting group (Ring, UCD, Circular,
Terminate), this program determines
whether the extension where the Do Not
Disturb feature is set receives the call or
not.
7 When an incoming call is received in a
Hunting group (Ring, UCD, Circular,
Terminate), this program determines
whether the extension where the Call
Forwarding feature is set receives the
call or not.
8 Enables or disables Circular and
Terminate Hunting.
13-9 Unused
14 Allows or prevents dialing "0" when the
MDN number is "0".
16, 15 Unused
Programming Guide
Explanation
Description Selection Default
0: not printed out
1: printed out
0 : enable
1 : disable
0 : first entered
code
1 : last entered
code
0 : receive
1 : not receive
0 : receive
1 : not receive
0 : disable
1 : enable
0 : allow
1 : prevent
General Programming
References
1 Account Code
Entry
1
1 Account Code
Entry
1 None
1 None
1 Station Hunting
1 None
367