Isdn Tei Mode - Panasonic KX-TD1232 Program Manual

[427] ISDN TEI Mode

Description
Assigns the Terminal Endpoint Identifier (TEI) mode on an ISDN port basis.
Selection
• Port number:
KX-TD816 — 01 through 04,
KX-TD1232 — 01 through 12,
• Fix 0 through 63 / Automatic
Default
All ports — Automatic
Programming
1.
Enter 427.
Display: 427 TEI ASSIGN
2.
Press NEXT.
Display: Port NO?
3. Enter a port number.
To enter port number 01, you can also press NEXT.
Display example: #01:Automatic
4.
Enter the TEI.
To change the current entry, press CLEAR and enter the new number. If you do not enter
a number, "Automatic" is assigned.
5.
Press STORE.
6.
To program another port, press NEXT or PREV, or SELECT and the desired port
number.
7. Repeat steps 4 through 6.
8.
Press END.
Conditions
• For the KX-TD1232, port numbers 01 through 06 are for the Master System and 07 through
12 are for the Slave, if available.
• Refer to program [423] for the list of the ISDN port numbers and their corresponding jack
numbers.
• If "Point" is selected in program [425], assign the fixed TEI. If "Multipoint" is selected,
assign "Automatic".
Programming Guide
( =all ports)
( =all ports)
General Programming
213