Isdn Outgoing Clir Service Assignment - Panasonic KX-TD1232 Program Manual

[419] ISDN Outgoing CLIR Service Assignment

Description
Assigns whether ISDN CLIR (Calling Line Identification Restriction) service is enabled or
disabled for outgoing outside calls. If disabled, the subscriber's number of your system is sent
to the called party.
Selection
• Outside line (CO) number:
KX-TD816 — 01 through 08,
KX-TD1232 — 01 through 24,
( =all outside lines)
• Enable / Disable
Default
All outside lines — Disable
Programming
1.
Enter 419.
Display: 419 ISDN CLIR
2. Press NEXT.
Display: CO Line NO?
3. Enter an outside line number.
To enter outside line number 01, you can also press NEXT.
Display example: CO01:Disable
4.
Keep pressing SELECT until the desired selection is displayed.
5.
Press STORE.
6. To program another outside line, press NEXT or PREV, or SELECT and the desired
outside line number.
7.
Repeat steps 4 through 6.
8.
Press END.
Conditions
• For the KX-TD1232, outside lines 01 through 12 are for the Master System and outside
lines 13 through 24 are for the Slave, if available.
• To assign all outside lines to the same selection, press the
display shows the contents programmed for outside line 01.
• Program [454] DN Assignment is used to store the directory number of your system that
is sent to the called party.
Programming Guide
General Programming
key in step 3. In this case, the
201