Outside Line Name Assignment - Panasonic KX-TD1232 Program Manual

[417] Outside Line Name Assignment

Description
Assigns names of the company or customer to each outside line so that the operator or
extension user can find the destination which the caller is trying to reach before answering. If
Caller ID is assigned, each extension can select either the initial display, Caller ID or line name.
Selection
• Outside line (CO) number:
KX-TD816 — 01 through 08,
KX-TD1232 — 01 through 48,
(25-47: for PRI ISDN line / 25-48: for T1 line)
• Name:
10 characters (max.)
Default
All outside lines — Not stored
Programming
1. Enter 417.
Display: 417 CO LINE NAME
2. Press NEXT.
Display: CO Line NO?
3.
Enter an outside line number.
To enter outside line number 01, you can also press NEXT.
Display example: CO01:Not Stored
4.
Enter a name.
For entering characters, see Section 1.4 Entering Characters.
To delete the current entry, press CLEAR.
To change the current entry, press CLEAR and enter the new name.
5.
Press STORE.
6.
To program another outside line, press NEXT or PREV, or SELECT and the desired
outside line number.
7. Repeat steps 4 through 6.
8. Press END.
Conditions
• For the KX-TD1232, outside lines 01 through 12 are for the Master System and outside
lines 13 through 24 are for the Slave, if available.
Programming Guide
( =all outside lines)
General Programming
197