Panasonic KX-TD1232 Program Manual page 29

8. Press
9. Keep pressing SELECT until the desired day of the week is displayed.
10. Press STORE.
11. Press NEXT.
Display example: 12:00 PM 24
12.
Enter the hour.
To change the current entry, press CLEAR and enter the new hour.
13.
Press
14.
Enter the minute.
To change the current entry, press CLEAR and enter the new minute.
15.
Press
16.
Press SELECT for AM or PM.
17.
Press
18.
Press SELECT for 12 or 24 (hour format).
19.
Press STORE.
20.
Press END.
Conditions
• After changing an entry, you can press STORE. You do not have to perform the rest of the
steps.
• To return to a previous field, press
• If you hear an alarm after pressing STORE, check that the date is valid.
• The clock starts immediately after the STORE button is pressed.
• You cannot leave an entry empty.
• Program [990] System Additional Information, Area 05 - Bit 1 is used to enable the
automatic time adjustment by Caller ID information once a day.
Features Guide References
Display, in Idle
Programming Guide
.
.
.
.
in steps 4 through 9 and steps 13 through 18.
General Programming
29