Disconnect Time - Panasonic KX-TD1232 Program Manual

General Programming

[414] Disconnect Time

Description
Determines the amount of time between successive accesses to the same outside line.
Selection
• Outside line group (TRG) number:
1 through 8,
( =all outside line groups)
• Time (seconds):
1.5 / 4.0
Default
All outside line groups — 1.5 sec
Programming
1.
Enter 414.
Display: 414 DISCONNECT
2. Press NEXT.
Display: TRK GRP NO?
3.
Enter an outside line group number.
To program outside line group number 1, you can also press NEXT.
Display example: TRG1:1.5sec
4. Keep pressing SELECT until the desired time is displayed.
5. Press STORE.
6. To program another outside line group, press NEXT or PREV, or SELECT and the desired
outside line group number.
7.
Repeat steps 4 through 6.
8.
Press END.
Conditions
• The disconnect time must be longer than the requirements of the central office or the host
PBX.
• To assign all outside line groups to one selection, press the
display shows the contents programmed for outside line group 1.
• Program [401] Outside Line Group Assignment is used to assign each outside line to an
outside line group.
192
key in step 3. In this case, the
Programming Guide