Isdn Extension Progress Tone - Panasonic KX-TD1232 Program Manual

[429] ISDN Extension Progress Tone

Description
Enables or disables to send the progress tone to ISDN extension on ISDN port basis.
Selection
• Port number:
KX-TD816 — 01 through 04,
KX-TD1232 — 01 through 12,
• Enable / Disable (no tone)
Default
All ports — Disable
Programming
1.
Enter 429.
Display: 429 ISDN TONE
2.
Press NEXT.
Display: Port NO?
3. Enter a port number.
To enter port number 01, you can also press NEXT.
Display example: #01:Disable
4.
Keep pressing SELECT until the desired selection is displayed.
5.
Press STORE.
6.
To program another port, press NEXT or PREV, or SELECT and the desired port
number.
7. Repeat steps 4 through 6.
8. Press END.
Conditions
• For the KX-TD1232, port numbers 01 through 06 are for the Master System and 07 through
12 are for the Slave, if available.
• Refer to program [423] for the list of the ISDN port numbers and their corresponding jack
numbers.
• To assign all ports to one selection, press the
the contents programmed for Port 01.
Programming Guide
( =all ports)
( =all ports)
key in step 3. In this case, the display shows
General Programming
217