Panasonic KX-TD1232 Program Manual page 183

• To assign all outside lines to one selection, press the
shows the contents programmed for outside line 01.
• You set the extension numbers in program [003] Extension Number Set, ISDN extension
numbers in program [012] ISDN Extension Number Set, voice mail extension numbers
in program [118] Voice Mail Extension Number Assignment, phantom extension
numbers in program [124] Phantom Extension Number Assignment or floating numbers
of pager(s), DISA (Direct Inward System Access)
modem* in program [813] Floating Number Assignment.
• If an outside line is also programmed for DIL 1:N in programs [603-604] DIL 1:N
Extension and Delayed Ringing —— Day / Night, it is regarded as a DIL 1:1 line.
• For ISDN lines, the outside lines which correspond to the ISDN port number should have
the same DIL 1:1 destination.
<Example>
When a KX-TD386 is installed, outside line numbers 1 and 2 which correspond to ISDN
port number 1 should have the same DIL 1:1 destination.
Outside ISDN Port No.
Line
Master
No.
1, 2 1
3, 4 2
5, 6 3
7, 8 4
9, 10 5
11, 12 6
Features Guide References
Direct In Lines (DIL)
Direct Inward System Access (DISA)
Night Service
Available for the KX-TD1232 only.
*1
Programming Guide
KX-TD816
KX- KX-
TD382 TD384 /
Slave
KX-
TD284
7 - Jack 1
8 - Jack 2
9 Jack 1 Jack 3
10 Jack 2 Jack 4
11 -
12 -
key in step 3. In this case, the display
message(s), extension group(s) and the
*1
KX- KX-
TD386 TD382
Jack 1 -
Jack 2 -
Jack 3 -
Jack 4 -
- - Jack 1
- - Jack 2
General Programming
KX-TD1232
KX- KX-
TD384 / TD386
KX-
TD284
- Jack 1
- Jack 2
Jack 1 Jack 3
Jack 2 Jack 4
Jack 3 Jack 5
Jack 4 Jack 6
183