Panasonic KX-TD1232 Program Manual page 361

Area Bit
01 1 Sound source during transfer.
2 Result of pressing the hookswitch
lightly and then replacing the handset
(during a CO line call (single line
telephones only)).
3 Result of pressing the FLASH or
FLASH / RCL button on proprietary
telephones (during an outside call).
However, External Feature Access is not
available with ISDN.
4-7 Unused
8 Enables or disables the dial tone
between obtaining a CO line and dialing
the phone number when using the one-
touch dial, redial or speed dial function.
9 Result of pressing the hookswitch
lightly (single line telephones only).
10 Sets the duration of the DTMF signals
sent to the Voice Processing System
(VPS) ports.
12,11 Sets the time the system waits before
sending DTMF signals (such as a
mailbox number) to the VPS after the
VPS answers a call.
14,13 Sets the time the system waits before
sending DTMF signals (programmed in
[113]) to the VPS after the VPS calls an
extension.
15 Assigns whether the system or the VPS
turns off the message Waiting lamp
when the user hears a message recorded
in a mailbox.
16 Unused
Programming Guide
Explanation
Description Selection Default
0 : ringback tone
1 : Music on Hold
0 : Consultation
Hold
1 : disconnection
0 : disconnection
signal
1 : External
Feature Access
0 : disable
1 : enable
0 : Consultation
Hold
1 : disconnection
0 : 80 ms
1 : 160 ms
00 : 0.5 s 10
01 : 1.0 s
10 : 1.5 s
11 : 2.0 s
00 : 0.5 s 10
01 : 1.0 s
10 : 1.5 s
11 : 2.0 s
0 : system
1 : VPS
General Programming
References
1 • CALL
TRANSFER
FEATURES
• Music on Hold
0 Consultation
Hold
0 • External
Feature Access
• Flash
1 None
0 Consultation
Hold
0 Voice Mail
Integration
Voice Mail
Integration
Voice Mail
Integration
0 • Message
Waiting
• Voice Mail
Integration
361