[109] Expansion Unit Type
Description
Assigns the type of expansion units to be used in the system.
This allows the system to identify the unit in each expansion unit location.
Selection
KX-TD816
• Areas 1; 2 = C / S2 / S4 / S6 / BD / E
KX-TD1232
• Master / Slave
• Areas 1; 2; 3 = C / S2 / S4 / S6 / PR / BD / T1 / E1 / E2
(C: 4-Outside lines / S2: 2-ISDN lines / S4: 4-ISDN lines /
S6: 6-ISDN lines / PR: 1 PRI line / BD: 4-DID lines / T1: 24-T1 lines /
E, E1: 8-Extension lines 1 / E2: 8-Extension lines 2)
Default
KX-TD816: C;E
KX-TD1232: Master and Slave — C;E1;E2
Programming
KX-TD816
1.
Enter 109.
Display: 109 EXPAND C ,E1
2.
Press NEXT.
Display example: Master:C ;E
3.
Keep pressing SELECT until the desired selection in Area 1 is displayed.
4.
Press
5.
Keep pressing SELECT until the desired selection in the Area 2 is displayed.
6.
Press STORE.
7.
Press END.
KX-TD1232
1.
Enter 109.
Display: 109 EXPAND C ,E1
2.
Press NEXT to program the Master System.
To program "Slave", press NEXT again.
Programming Guide
to program Area 2, if required.
General Programming
71