Rotate View - KGuard Security Easy Link EL421 User Manual

3.7.4 Rotate View

With this function, the system will automatically rotate the display through all the channels and split window display.
To enable rotate view:
1
In the preview mode, right-click on the mouse to display the Pop-up menu.
2
Select Start Rotate.
The rotating display starts. By default, each display switches at 5 seconds interval. You can change the switch rotate
time interval in Display menu (see
An example of the screen display rotation, as follows (8-channel DVR with 2 available channels):
Full screen
(First channel)
8-window display
Note:
The displayed screens vary depending on the available channels.
To disable rotate view:
1
Right-click on the mouse to display the Pop-up menu.
2
Select Stop Rotate.
Note:
Rotate function is not available when View Setup is enabled (see
"4.1.2 Output Settings" on page
Chapter 3: Getting Started
40).
Full screen
(Second channel)
4-window display
"4.1.2 Output Settings" on page 40).
DVR User's Manual
35