KGuard Security KG-SH122E.V2 User Manual
  1. Manuals
  2. Brands
  3. KGuard Security Manuals
  4. DVR
  5. KG-SH122E.V2
  6. User manual

KGuard Security KG-SH122E.V2 User Manual

Standalone dvr
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
KGUARD Standalone DVR KG-SH122E.V2_SH222E.V2_SH522E.V2_User Manual(Hardware)
KGUARD Standalone DVR
KG-SH122E.V2/222E.V2/522E.V2
User Manual
【 【 【 【 Hardware】 】 】 】
2011-02-21
www.kguardsecurity.com
All rights reserved
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the KG-SH122E.V2 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for KGuard Security KG-SH122E.V2

Summary of Contents for KGuard Security KG-SH122E.V2

  • Page 1 KGUARD Standalone DVR KG-SH122E.V2_SH222E.V2_SH522E.V2_User Manual(Hardware) KGUARD Standalone DVR KG-SH122E.V2/222E.V2/522E.V2 User Manual 【 【 【 【 Hardware】 】 】 】 2011-02-21 www.kguardsecurity.com All rights reserved...
  • Page 2 KGUARD Standalone DVR KG-SH122E.V2_SH222E.V2_SH522E.V2_User Manual(Hardware) Safety Precautions Do Not touch live electrical parts. Electric shock can be avoided. Follow the recommended practices listed below. Faulty installation, improper grounding, and incorrect operation and maintenance of electrical equipment are always sources of danger. Do Not try to install equipment outdoor, when the wind and rain is strong.
  • Page 3 KGUARD Standalone DVR KG-SH122E.V2_SH222E.V2_SH522E.V2_User Manual(Hardware) Always wear dry gloves, rubber-soled shoes, or stand on a dry board or platform. Always Follow recognized safety standards. Always wear correct eye, ear, and body protection. Always have second person on-site, while you work in the darkness places, poor ventilation places and high places.
  • Page 4 KGUARD Standalone DVR KG-SH122E.V2_SH222E.V2_SH522E.V2_User Manual(Hardware) LIMITATION OF LIABILITY THIS PUBLICATION IS PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY, FITNESS FOR ANY PARTICULAR PURPOSE, OR NON-INFRINGEMENT OF THE THIRD PARTY’S RIGHT.
  • Page 5 KGUARD Standalone DVR KG-SH122E.V2_SH222E.V2_SH522E.V2_User Manual(Hardware) FCC Compliance Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference, and this device must accept any interference received, including interference that may cause undesired operation. FCC CAUTION! This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

  • Page 6: Table Of Contents

    KGUARD Standalone DVR KG-SH122E.V2_SH222E.V2_SH522E.V2_User Manual(Hardware) TABLE OF CONTENTS CHAPTER 1. SH-122E.V2 OVERVIEW........................8 Packing List ..............................8 Components ............................... 9 Installation and Connections ........................14 Hard Disc ..............................14 Camera & Monitor............................ 16 PTZ CAMERA ............................17 keyboard ..............................18 RS-485 keyboard or Terminal ........................
  • Page 7 KGUARD Standalone DVR KG-SH122E.V2_SH222E.V2_SH522E.V2_User Manual(Hardware) Introduction: The H.264 digital video/audio recorders are designed for use within a surveillance system with limited space, and are a combination of a hard disc recorder, a video multiplexer, and a web server. To achieve the highest inter-connectivity and inter-operability, this series of digital video/audio recorders are all based on industry-leading front-end to back-end surveillance infrastructure.

  • Page 8: Chapter 1. Sh-122E.v2 Overview

    KGUARD Standalone DVR KG-SH122E.V2_SH222E.V2_SH522E.V2_User Manual(Hardware) Chapter 1. SH-122E.V2 Overview Packing List SH122E.V2 Remote Controller Power Adapter Power Cord Screws Quick Guide Optional items RS-485 to RS-232 Converter RS-232 connector RS-232 Y-Cable (optional) (optional) (optional) If you would like to purchase the optional items, above, please contact the local venders.

  • Page 9: Components

    KGUARD Standalone DVR KG-SH122E.V2_SH222E.V2_SH522E.V2_User Manual(Hardware) Components www.kguardsecurity.com All rights reserved...
  • Page 10 KGUARD Standalone DVR KG-SH122E.V2_SH222E.V2_SH522E.V2_User Manual(Hardware) Area A (Front view) Symbol Button Functions Alpha-numeric For selecting Channels. Also, it can be used for typing text and number, when use mobile functions. Mode MODE For toggling between live mode and playback mode in main screen display.
  • Page 11 KGUARD Standalone DVR KG-SH122E.V2_SH222E.V2_SH522E.V2_User Manual(Hardware) Split Windows For next/previous split-window display. + / - LED indicator Main power, HDD and Network access indicators. LEDs IR sensor For receiving signal from I/R remote controller U.S.B port For USB 2.0 compatible storage device U.S.B port For USB MOUSE connection.
  • Page 12 KGUARD Standalone DVR KG-SH122E.V2_SH222E.V2_SH522E.V2_User Manual(Hardware) Please note that only one of the NC or NO connectors can be connected . IR extension port(IR optional) For connection IR receiver(Optional) Main Power switch(DC +12V) For DC 12V POWER SWITCH . Power cord socket(DC +12V) For DC12V POWER INPUT.
  • Page 13 KGUARD Standalone DVR KG-SH122E.V2_SH222E.V2_SH522E.V2_User Manual(Hardware) archived files and POS search. Enter For confirming the options or goto certain pages. Click to move up or backspace for text/numeric entry. ▲/BS: *BS: BACKSPACE ◄ : ► LEFT/RIGHT BUTTON. ▼/DEL Click to move down or delete text for text/numeric entry. (Volume/Zoom) +/- Buttons.

  • Page 14: Installation And Connections

    KGUARD Standalone DVR KG-SH122E.V2_SH222E.V2_SH522E.V2_User Manual(Hardware) Installation and Connections Hard Disc ！ ！ ！ ！ Caution Do NOT install or remove hard drive while DVR is running! ！ ！ ！ ！ Warning Make sure that you already turn off the power and disconnect the power cord, Before performing any services or maintenances.
  • Page 15 KGUARD Standalone DVR KG-SH122E.V2_SH222E.V2_SH522E.V2_User Manual(Hardware) Step 3. Connect Hard Disc to the cable of SATA. Step 4. Install the hard disc in the bracket, and tighten 4 screws on the side of hard disc(hand tight). Before install the cover, make sure that the cable all in the correct position without loosing parts or cables.

  • Page 16: Camera & Monitor

    KGUARD Standalone DVR KG-SH122E.V2_SH222E.V2_SH522E.V2_User Manual(Hardware) Camera & Monitor ！ ！ ！ ！ Warning Make sure that the switch is in off position ,before you connect the power cord. and also make sure that the power is correct of adaptor. Make sure to set the NTSC/PAL Selector Switch on the main board according to the local TV system for the system to work correctly.

  • Page 17: Ptz Camera

    KGUARD Standalone DVR KG-SH122E.V2_SH222E.V2_SH522E.V2_User Manual(Hardware) cameras or other audio sources. Audio output Connect the audio output connector to the audio line-in from speakers Connect the alarm inputs to NC and/or NO type of alarm signals. Alarm inputs Connect the alarm output #1 to NC type of alarm signal, or alarm Alarm outputs output #2 to NO type of alarm signal.

  • Page 18: Keyboard

    KGUARD Standalone DVR KG-SH122E.V2_SH222E.V2_SH522E.V2_User Manual(Hardware) keyboard For Keyboard RS-485+ TxD+ RS-485- TxD- For PTZ Device R-S485+ RxD+(Data+) RS-485- RxD-(Data-) RS-485 keyboard or Terminal Connect the RS-485 connector to a RS-485 keyboard controller or VT-100 terminal via the appropriate cables. Please refer to the diagram above for the correct connection (as shown). POS system Connect the RS-485 connector to POS system via the appropriate cable.

  • Page 19: Chapter 2. Sh-222E.v2 Overview

    KGUARD Standalone DVR KG-SH122E.V2_SH222E.V2_SH522E.V2_User Manual(Hardware) Chapter 2. SH-222E.V2 Overview Packing List SH222E.V2 Remote Controller Power Adapter Power Cord Quick Guide Screws Optional items RS-485 to RS-232 Converter RS-232 connector RS-232 Y-Cable (optional) (optional) (optional) If you would like to purchase the optional items, above, please contact the local venders.

  • Page 20: Components

    KGUARD Standalone DVR KG-SH122E.V2_SH222E.V2_SH522E.V2_User Manual(Hardware) Components www.kguardsecurity.com All rights reserved...
  • Page 21 KGUARD Standalone DVR KG-SH122E.V2_SH222E.V2_SH522E.V2_User Manual(Hardware) Area A (Front view) Symbol Button Functions Alpha-numeric For selecting Channels. Also, it can be used for typing text and number, when use mobile functions. Mode MODE For toggling between live mode and playback mode in main screen display. Also, as the function of “backward/slow backward ”,when you used the playback mode.
  • Page 22 KGUARD Standalone DVR KG-SH122E.V2_SH222E.V2_SH522E.V2_User Manual(Hardware) ◄,► Left/Right In PTZ control, it is used for panning the camera. In playback mode, the function as fast backward/forward. In the other screens, it is used for cursor or focus window. ENTER ENTER This button is used as “enter” key in normal operation.
  • Page 23 KGUARD Standalone DVR KG-SH122E.V2_SH222E.V2_SH522E.V2_User Manual(Hardware) RS-485 For RS-485 compatible PTZ camera(s) or keyboard. For more information , please refer to installation and removal(RS-485 setting). Alarm Input (ALARM IN 1-4) For Connecting to external devices such as sensors or door switches. Alarm Output For connecting Alarm.(Normally Closed (NC) (left), for alarm (ALARM OUT NC/NO)
  • Page 24 KGUARD Standalone DVR KG-SH122E.V2_SH222E.V2_SH522E.V2_User Manual(Hardware) location. Mode Press to switch between live and playback mode. For changing channels. To call monitor and for video only(For switching to or return Call from full screen display of the focus camera in main screen display).
  • Page 25 KGUARD Standalone DVR KG-SH122E.V2_SH222E.V2_SH522E.V2_User Manual(Hardware) MODE Fast/slow backward 2x/4x/8x/16X Fast/slow forward 2x/4x/8x/16X DVR1 – DVR4 Reserved For environmental-friendly, please recycle the battery or use rechargeable battery. www.kguardsecurity.com All rights reserved...

  • Page 26: Installation And Connections

    KGUARD Standalone DVR KG-SH122E.V2_SH222E.V2_SH522E.V2_User Manual(Hardware) Installation and Connections Hard Disc ！ ！ ！ ！ Caution Do NOT install or remove hard drive while DVR is running! ！ ！ ！ ！ Warning Make sure that you already turn off the power and disconnect the power ！...
  • Page 27 KGUARD Standalone DVR KG-SH122E.V2_SH222E.V2_SH522E.V2_User Manual(Hardware) Step 4. Install the hard disc in the bracket, and tighten 4 screws on the side of hard disc(hand tight). Before install the cover, make sure that the cable all in the correct position without loosing parts or cables. Step 5.

  • Page 28: Camera & Monitor

    KGUARD Standalone DVR KG-SH122E.V2_SH222E.V2_SH522E.V2_User Manual(Hardware) Camera & Monitor ！ ！ ！ ！ Warning Make sure that the switch is in off position ,before you connect the power cord. and also make sure that the power is correct of adaptor. Make sure to set the NTSC/PAL Selector Switch on the main board according to the local TV system for the system to work correctly.

  • Page 29: Ptz Camera

    KGUARD Standalone DVR KG-SH122E.V2_SH222E.V2_SH522E.V2_User Manual(Hardware) speakers Alarm inputs Connect the alarm inputs to NC and/or NO type of alarm signals. Connect the alarm output #1 to NC type of alarm signal, or Alarm outputs alarm output #2 to NO type of alarm signal. Please note that only one of the NC or NO connectors can be connected only.

  • Page 30: Keyboard

    KGUARD Standalone DVR KG-SH122E.V2_SH222E.V2_SH522E.V2_User Manual(Hardware) keyboard For Keyboard RS-485+ TxD+ RS-485- TxD- For PTZ Device RS-485+ RxD+(Data+) RS-485- RxD-(Data-) RS-485 keyboard or Terminal Connect the RS-485 connector to a RS-485 keyboard controller or VT-100 terminal via the appropriate cables. Please refer to the diagram above for the correct connection (as shown). POS system Connect the RS-485 connector to POS system via the appropriate cable.

  • Page 31: Chapter 3. Sh-522E.v2 Overview

    KGUARD Standalone DVR KG-SH122E.V2_SH222E.V2_SH522E.V2_User Manual(Hardware) Chapter 3. SH-522E.V2 Overview Packing List SH122E.V2 Remote Controller Power Adapter Power Cord Screws Quick Guide Optional items RS-485 to RS-232 Converter RS-232 connector RS-232 Y-Cable (optional) (optional) (optional) If you would like to purchase the optional items, above, please contact the local venders.

  • Page 32: Components

    KGUARD Standalone DVR KG-SH122E.V2_SH222E.V2_SH522E.V2_User Manual(Hardware) Components www.kguardsecurity.com All rights reserved...
  • Page 33 KGUARD Standalone DVR KG-SH122E.V2_SH222E.V2_SH522E.V2_User Manual(Hardware) Area A (Front view) Symbol/Button Functions DVD Writer (optional) Used for backup purpose if installed. USB Mouse Connector Connect to USB 1.1 compatible mouse before the DVR is power on. USB connector Connect to USB 2.0 compatible storage device, such as USB 2.0 disk drive, DVD+RW, card reader, etc.
  • Page 34 KGUARD Standalone DVR KG-SH122E.V2_SH222E.V2_SH522E.V2_User Manual(Hardware) (▼/DEL) circumstances. In PTZ control, press this button to tilt down the camera. In text editing mode, this button is used as “del” key. ENTER Button This button is used as “enter” key in most circumstances. In PTZ control, this button is used to start/stop the selected PTZ control mode.
  • Page 35 KGUARD Standalone DVR KG-SH122E.V2_SH222E.V2_SH522E.V2_User Manual(Hardware) Power Input (DC 12V) Connect to DC 12V power source. Power Switch (POWER) Turn the power of this unit on/off. S-video Monitor Output Connect TV monitor to the mini-din S-video connector for main Connector (MAIN OUT Y/C) monitor display.
  • Page 36 KGUARD Standalone DVR KG-SH122E.V2_SH222E.V2_SH522E.V2_User Manual(Hardware) Enter For confirming the options or goto certain pages. ▲/BS: Click to move up or backspace for text/numeric entry. *BS: BACKSPACE ◄ : ► LEFT/RIGHT BUTTON. Click to move down or delete text for text/numeric ▼/DEL entry.

  • Page 37: Installation And Connections

    KGUARD Standalone DVR KG-SH122E.V2_SH222E.V2_SH522E.V2_User Manual(Hardware) Installation and Connections Hard Disc ！ ！ ！ ！ Caution Do NOT install or remove hard drive while DVR is running! ！ ！ ！ ！ Warning Make sure that you already turn off the power and disconnect the power cord, Before performing any services or maintenances.

  • Page 38: Camera & Monitor

    KGUARD Standalone DVR KG-SH122E.V2_SH222E.V2_SH522E.V2_User Manual(Hardware) Camera & Monitor ！ ！ ！ ！ Warning Make sure that the switch is in off position ,before you connect the power cord. and also make sure that the power is correct of adaptor. Make sure to set the NTSC/PAL Selector Switch on the back panel according to the local TV system for the system to work correctly.
  • Page 39 KGUARD Standalone DVR KG-SH122E.V2_SH222E.V2_SH522E.V2_User Manual(Hardware) connector to a VGA monitor. The TV/VGA monitor displays selected live or recorded cameras in any available split window format. Connect the main monitor output connector (BNC) to a Monitor(Main out) surveillance TV monitor. Connect the audio input connector to the audio line-out Audio input from system cameras or other audio sources.

  • Page 40: Ptz Camera

    KGUARD Standalone DVR KG-SH122E.V2_SH222E.V2_SH522E.V2_User Manual(Hardware) PTZ CAMERA PTZ Device RS-485- RxD-(Data-) RS-485+ RxD+(Data+) Please refer to the diagram above for the correct connection (as shown). *Connect the RS-485 connector to PTZ camera(s) via the appropriate cable. The system supports a variety of different PTZ cameras, including Pelco D protocol Dome, SamSung SCC-641P, Kalatel Cyber Dome, Bosch AutoDome, etc.

  • Page 41: Pos System

    KGUARD Standalone DVR KG-SH122E.V2_SH222E.V2_SH522E.V2_User Manual(Hardware) POS system Connect the RS-232 connector to POS system via the appropriate cable. The system supports the POS systems which can be connected to the following printers – Epson-TM200, Epson-TMU295, Epson-TMU300, Epson-TMU675, Epson-TMT882, Epson-RPU420, and Epson-MD332S. Please make sure to setup the RS-232 port, accordingly.

  • Page 42: Chapter 4. Appendix

    KGUARD Standalone DVR KG-SH122E.V2_SH222E.V2_SH522E.V2_User Manual(Hardware) Chapter 4. Appendix Specification Model SH-122E.V2/SH-222E.V2 System O.S. Embedded Linux 2.6 Multiplex Hexaplex operation - simultaneous record, live, playback, backup, control, & remote access Certification FCC, CE,LVD Video Format NTSC or PAL Input 4-CH, BNC, 1Vp-p/75ohm Main monitor BNC x 1, 1Vp-p/75ohm VGA D-SUB 15-pin connector...
  • Page 43 KGUARD Standalone DVR KG-SH122E.V2_SH222E.V2_SH522E.V2_User Manual(Hardware) > 2TB of HDD storage size, Advanced format HDD supported Partitions Configurable alarm partition size Configurable auto-overwrite or not Backup 1 USB 2.0 ports for USB 2.0 disc drives, DVD+RW, DVD+R, DVD-R, card readers, HDD, etc. Self playback for backup files Alarm Input...
  • Page 44 KGUARD Standalone DVR KG-SH122E.V2_SH222E.V2_SH522E.V2_User Manual(Hardware) Weights & Dimension 320(W) x 210(D) x 50(H)mm Measures Weight 2.0 KG (without HDD) Power Source +12 VDC Consumption 30W Max. Operating Temperature C ~ +45 For more information, please refer to Appendix. SH522E.V2 16ch Model System O.S.
  • Page 45 KGUARD Standalone DVR KG-SH122E.V2_SH222E.V2_SH522E.V2_User Manual(Hardware) readers, HDD, etc. DVD models: DVD+RW, DVD+R, DVD-R ( optional ) Auto player for backup files Alarm & Digital Input 16 contact or TTL/CMOS signal, polarity selectable DI/DO Relay Output NO(Normally Open) x 2, NC(Normally Closed) x 2 Buzzer Trigger Via Sensor input, Video loss, &...

  • Page 46: Compatible Device Table

    KGUARD Standalone DVR KG-SH122E.V2_SH222E.V2_SH522E.V2_User Manual(Hardware) Compatible device table SH-122E.V2/222E.V2/522E.V2 U.S.B 2.0 Devices compatible table USB-Storage Enclosures 5.25” Brand Capacity Macpower’s Alumni Prefect USB 2.0 - PF-U2MS ― USB-Disc Storage Brand Capacity Transcend’s JetFlash 150/V60 Series, JetFlash V33 Apacer’s Handy Steno AH220 ―...
  • Page 47 KGUARD Standalone DVR KG-SH122E.V2_SH222E.V2_SH522E.V2_User Manual(Hardware) POS Printer compatible table Brand Epson General (EX. Epson-TM200, Epson-TMU300, Epson-TMU675, Epson-TMT882, Epson-RPU420, and Epson-MD332S) and Epson-TMU295. KEYBOARD Model Model Pelco D protocol Dome Terminal (EX. VT-100) SamSung SCC-641P Control Protocol Kalatel Cyber Dome ― PIH-series ―...

This manual is also suitable for:

Kg-sh222e.v2Kg-sh522e.v2

Table of Contents