Related Manuals for KGuard Security Easy Link PLUS Series
Summary of Contents for KGuard Security Easy Link PLUS Series
- Page 1 USER MANUAL Easy Link PLUS Series Default user name: admin Default password: 123456...
- Page 2 There is dangerous “voltage” The user needs to refer to the important presence near by the product’s enclosure operating and maintenance or servicing which may be risk of person. instructions. Easy Link PLUS Series DVR...
- Page 3 • Always wear protective clothing such as long sleeve shirts while you are installing or • Do not put the objects on top of the equipment. removing equipment. • Always wear high, snug fitting shoes. • Always wear clean clothes without grease or oil. Easy Link PLUS Series DVR...
-
Page 4: Table Of Contents
Network: DDNS & FTP ............19 Alarm: Motion ..............20 Alarm: Alarm Kit ..............21 Alarm: Alarm Kit & Siren Schedule ........22 Record Search: General .............23 Record Search: General & Events ........24 Record Search: General (continued) ........25 Record Search: General (continued) ........26 Easy Link PLUS Series DVR... -
Page 5: Install The Hard Disk Drive
HDD to the DVR with the four (4) screws. 8/16-Channel DVR a) Aligning the connectors on the HDD with the connectors on the motherboard, place the HDD on the DVR case. Then push to make the connection. Easy Link PLUS Series DVR... -
Page 6: Making The Connections
Alarm Antenna, Window/Door Sensor, PIR Motion Sensor, Siren, Key Fob, etc. AUDIO AUDIO VIDEO HDMI INPUT OUTPUT INPUT L) Power - This is where you connect the power adapter. Rear View (16-Channel DVR) AUDIO AUDIO HDMI VIDEO INPUT INPUT OUTPUT Easy Link PLUS Series DVR... - Page 7 You need the USB mouse to go through the initial setup menus once the DVR is powered on. Connect the video output of the DVR to the TV or monitor via HDMI or VGA connection. Easy Link PLUS Series DVR...
-
Page 8: Common Dvr Operations
Rebooting and shutting down operations can be performed via the Main Menu. You will see the virtual keyboard automatically on the screen anytime you need to enter data. Click to delete a character Click to enter the text Click to toggle the keyboard to upper case Easy Link PLUS Series DVR... -
Page 9: Live Viewing Screen
Click to configure the camera PTZ settings. This icon appears when the camera has detected motion and triggers recording. VIDEO LOSS: Camera is not connected to the DVR. This feature is not supported . NOTE: Easy Link PLUS Series DVR... -
Page 10: Main Menu
- Click to copy the current settings to all channels or one specific channel. K) Default - Click to restore the default settings. L) Save - Click to save the modifications. M) Cancel - Click to discard the modifications. Easy Link PLUS Series DVR... -
Page 11: Display: Live
Covert: Enable if you want to hide this channel from appearing on the Live Viewing screen. Disabling or enabling this option does not affect video recording on the HDD. • Record Time: Disable if you do not want to see the recording time on the channel. • Show Time: Disable if you do not want the current time to appear on the channel. Easy Link PLUS Series DVR... -
Page 12: Display: Output
The DVR will restart after you change the resolution. • Transparency: Decide how transparent you want the menus to be. Choose partially transparent (see-through) if you need to keep an eye on happenings while adjusting settings. Easy Link PLUS Series DVR... -
Page 13: Display: Privacy Zone
Main Menu. The privacy zone(s) are not visible on channel live view as well as on the video file. On live view NOTE: and video file, you can see the privacy zone(s) covered with black boxes. Easy Link PLUS Series DVR... -
Page 14: Record: Record & Mainstream
DVR or using a camera with audio capablility (not included). Since the audio option is only available for the channels 1 to 4, you need to connect a camera with audio capability to these channels. Easy Link PLUS Series DVR... -
Page 15: Record: Schedule
Record: When the time slot is marked yellow, this indicates the channel records only when a motion is detected during that time slot. We recommend to use this type of recording. • No Record: A time slot marked black means that there is no recording scheduled for the time slot. Easy Link PLUS Series DVR... -
Page 16: Network: Network
DVR. Static: Requires all the network parameters to be filled in manually. PPPoE: This is an advanced protocol that allows the DVR to connect to the network more directly via DSL modem. Easy Link PLUS Series DVR... -
Page 17: Network: Network & Substream
Audio: Select this option if you want to hear the live sound at the remote session. This option is valid only if there is a microphone connected to the DVR or the camera has audio capabilities and the audio options is enabled for the channel. Easy Link PLUS Series DVR... -
Page 18: Network: Email & Email Schedule
For the convenience, you can create an email schedule. Define when and what type of events you want to be notified by email. The color codes on email schedule have the following meanings: • Green: Slot for Motion. • Red: Slot for Exception (HDD full, HDD error, or Video Loss). Easy Link PLUS Series DVR... -
Page 19: Network: Ddns & Ftp
• Max Length of File: Enter the maximum length of each file transferred via FTP. • Directory Name: Enter the default directory name for the FTP file exchange. • Test FTP: Click to test the FTP settings. Easy Link PLUS Series DVR... -
Page 20: Alarm: Motion
• Record Channel: Here you can select which channels you want to include to the motion detection. If the motion is detected, the recroding will start immediately on those channels. Easy Link PLUS Series DVR... -
Page 21: Alarm: Alarm Kit
Time(seconds): A continuous trigger by alarm sensors (for example window/door sensor and PIR motion sensor) within this time period will be considered as one single trigger. • Upgrade: Click to update the alarm kit program. Easy Link PLUS Series DVR... -
Page 22: Alarm: Alarm Kit & Siren Schedule
Select the siren which will sound when the alarm sensor is triggered. • Record Channel: Select which channels start to record when the alarm sensor is triggered. Alarm Device Icons Shock sensor Window/Door sensor Key fob Siren PIR (Passive Infrared) sensor Smoke sensor Easy Link PLUS Series DVR... -
Page 23: Record Search: General
Time: Click on the date that is marked with a small orange triangle in the calendar and specify the beginning time and end time of the footage you want to review in playback. Then click Play. The Playback screen opens. Easy Link PLUS Series DVR... -
Page 24: Record Search: General & Events
Select the date. Select the time. Click Search. Select the events from the table. Click Quick Backup to backup the entire event. To backup an individual event, choose the event first and then click Backup. Easy Link PLUS Series DVR... -
Page 25: Record Search: General (Continued)
- Select Playback timeline. i) Search Screen - Click to start a new search. Playback j) Channels - Check the channels to playback. Control k) Recording Calendar - Dates marked with Full screen orange triangles have video recordings. Easy Link PLUS Series DVR... -
Page 26: Record Search: General (Continued)
It can be a certain area or the whole screen. Click As a result of the Smart Search, you will see motion recordings as areas marked with dark green color inside the normal recording (green color). Part of the Screen Easy Link PLUS Series DVR... -
Page 27: Record Search: General (Continued)
Choose the video backup type and click Save. The device’s native video type is H.264. To view recordings in this format, please install the media player from the supplied NOTE: product CD. AVI type is supported by most media players. Easy Link PLUS Series DVR... -
Page 28: Device: Hdd & Ptz
Parity: Is necessary for error check. See the documentation of your PTZ-capable camera, to configure this setting. • Address: Set the command address of the PTZ system. Please be noted that each PTZ-capable camera needs a unique address to function properly. Easy Link PLUS Series DVR... -
Page 29: System: General & Users
To enable/disable the user account, modify the user name and password, click on the user account you wish to edit, then click Edit. • Change User Permissions: To modify user access permissions, click on the user account you wish to modify, then click Permission. Easy Link PLUS Series DVR... -
Page 30: System: Dst & Ntp
Enable if you want the DVR to update the date and time automatically. • Server Address: Select the NTP (Network Time Protocol) server. • Time Zone: Select the Time Zone in your location. • Update Now: Click here to update the system date and time. Easy Link PLUS Series DVR... -
Page 31: System: Info & Log
• Start Time/End Time: Specify the start and end date/time of the logs you want to review and/or save on an external USB storage device. Click Search. The logs will be listed on the table. Easy Link PLUS Series DVR... -
Page 32: Advanced: Maintain
Select this option to import the settings that you have saved earlier, using the Save Settings function. • Save Settings: Select this option to save the DVR current settings such as the video recording settings, network configurations, and etc to the USB device. Easy Link PLUS Series DVR... -
Page 33: Advanced: Events & Auto Upgrade
Enable to allow to use on-line system upgrade. • Check For updates: Check the checkbox to let the DVR look for updates. • Detect: Click to look for updates. • Upgrade: Click to upgrade the system over Internet directly. Easy Link PLUS Series DVR... -
Page 34: Remote Access Via Web Client
The following IP address is an example only. NOTE: The user login page opens as shown. The default DVR user name is “admin” and default password is “123456”. Enter the User Name and Password. Click Login. Easy Link PLUS Series DVR... -
Page 35: Remote Access Via Web Client (Continued)
Click Save to save the modificaitons. Here you can remotely configure the settings of the DVR. Please see “Main • File Type: Choose your preferred file type for manual recordings. Menu” on page 10 for more information. Easy Link PLUS Series DVR... -
Page 36: Troubleshooting
The buzzer keeps on sounding. Answer: • Check the Motion or Events settings. Motion Detection or Video Loss may be detected. Check the HDD capacity and the video connections, which may be triggering the buzzer. Easy Link PLUS Series DVR... - Page 37 Copyright © 2015 All rights reserved Customer Support KGUARD INFORMATION CO., LTD. USA Technical Support Contact Address: 4F, No.113, Jian 2nd Road, TEL:1-866-978-4888 Jhonghe District, New Taipei City 23585, Taiwan Email: usservice@kguardsecurity.com TEL: +886-2-8228-6080 FAX: +886-2-8221-6857 Email: support@kguardsecurity.com...
Need help?
Do you have a question about the Easy Link PLUS Series and is the answer not in the manual?
Questions and answers