KGuard Security Easy Link EL421 User Manual page 98

Chapter 5: KGUARD Web Client
Dwell Time
Show Message
Send Email
Full Screen
Alarm Out
Enable Record
Post Recording
Record Channel Check the box to enable recording and then select the channels to record when the
4
After all settings are complete, click Save.
« TIP »
• To apply the same recording settings to other channels, click Copy. See
on page 85.
• To cancel any modifications and retain the existing settings, click Refresh.
DVR User's Manual
98
Select the alarm sound duration of the I/O alarm device (10S/20S/40S/60S) then check
to apply the setting to each alarm type.
Check the box to display a message on screen when the alarm is triggered.
Check to enable email alarm notification. If the function is enabled, the system will
send the alarm images to the specified email address. See
page 54.
Check the box to enable this function. If this function is enabled and the alarm is
triggered, the corresponding channel will be displayed in full screen. Select the screen
display duration (1 S/3 S/5 S/7 S/10 S)
If an alarm device is connected, check the box to make the device sound the alarm
when triggered.
Check the box to enable the post recording option.
Select the post-recording duration.
alarm is triggered.
"4.4.3 Email Settings" on
"Copying Settings To Other Channels"