Set Auto Maintenance - KGuard Security Easy Link EL421 User Manual

Menu Item
Enable
Buzzer
Show Message
Send Email
Alarm Out
Dwell Time
4
After all settings are complete, click Save.

Set Auto Maintenance

Use this feature to automatically reboot the DVR on a specified schedule. When the DVR reboots, all settings and data
are refreshed from the memory, which optimizes the DVR performance.
1
On the Main Menu, click Remote Setting.
2
On the left panel, click Advanced > Maintain.
3
Set Auto Maintain to Enable.
4
In Reboot, select the frequency to reboot the DVR. Options are:
• Everyday: Reboots the DVR on a daily basis. If this option is selected, specify the time you want to reboot the
DVR.
• Every Week: Reboots the DVR on a weekly basis. If this option is selected, specify the day of the week and the
time to reboot the DVR.
• Every Month: Reboots the DVR on a monthly basis. If this option is selected, specify the date (1 to 31) and the
time to reboot the DVR.
Note:
The illustration above is an example of Auto Reboot set to Every Week. The available fields vary depending on the
selected Reboot option.
5
After all settings are complete, click Save.
« TIP »
To restore the maintenance schedule to default setting, click Refresh.
Description
Select Enable to issue a notification when the event type occurs.
Set the buzzer duration when the event occurs (Off/10 S/20 S/40 S/60 S).
To disable buzzer, select Off.
Check the box to display a message on the screen when the event occurs.
Check to enable email alarm notification. If the function is enabled, the system will
send the alarm to the specified email address. See
54.
If an alarm device is connected, check the box to make the device sound the alarm
when the event occurs.
Select the alarm duration (10S/20S/40S/60S).
Chapter 5: KGUARD Web Client
"4.4.3 Email Settings" on page
DVR User's Manual
105