Easy Network Setup
The outstanding feature of this DVR is that you do not need to do any complicated network settings to set up the DVR
for remote live view on smart phone/pad/web browsers (MyKguard) or uploading images to Cloud.
In a DHCP typical personal home LAN (Local Area Network), basic steps are as below:
Basic Connection for Remote Live View on Smart Phone/Pad
Step 1: Connect the DVR to network
a. Connect the power adapter to the DVR. See
b. Connect a RJ-45 cable from the LAN port on the back of the DVR to an available port on a router.
Step 2: Install APP
Download KViewQR application on your smart phone/pad.
Step 3: Add connected DVR and view Live screen
Add the connected DVR by scanning the QR code. Once the
router provides IP address to DVR, the Live screen appears.
Basic Connection for Remote Live View on MyKguard
Step 1: Connect the DVR to network
a. Connect the power adapter to the DVR. See
b. Connect a RJ-45 cable from the LAN port on the back of the DVR to an available port on a router.
"Making Connection" on page 13.
"Making Connection" on page 13.
Aurora Series: Getting Started
DVR User's Manual
17