Managing System Settings; General Setup - KGuard Security Easy Link EL421 User Manual

Chapter 5: KGUARD Web Client
4
Set the Protocol, Baudrate, Data Bits, Stop Bits, and Parity.
Note:
Check the PTZ camera specifications for the correct settings.
5
Enable or disable Cruise.
6
Set the Address.
7
After all settings are complete, click Save.
« TIP »
• To apply the same recording settings to other channels, click Copy. See
on page 85.
• To cancel any modifications and retain the existing settings, click Refresh.

5.5.7 Managing System Settings

On the System Setup menu, you can modify the time zone and view the language used on the DVR and its signal
source.

General Setup

1
On the Main Menu, click Remote Setting.
2
On the left panel, click System > General. The General screen appears.
DVR User's Manual
100
"Copying Settings To Other Channels"