3.4.4 Rotate View
With this function, the system will automatically rotate the display through all the channels and split window display.
To enable rotate view:
1
In the preview mode, right-click on the mouse to display the Pop-up menu.
2
Select Start Rotate.
The rotating display starts. By default, each display switches at 5 seconds interval. You can change the switch rotate
time interval in Display menu (see
An example of the screen display rotation, as follows (8-channel DVR with 2 available channels):
Full screen
(First channel)
8-window display
Note:
The displayed screens vary depending on the available channels.
To disable rotate view:
1
Right-click on the mouse to display the Pop-up menu.
2
Select Stop Rotate.
Note:
Rotate function is not available when View Setup is enabled (see
"4.1 Setting the Display" on page
Chapter 3: Getting Started
39).
Full screen
(Second channel)
4-window display
"4.1 Setting the Display" on page
39)..
DVR User's Manual
35