Events Settings - KGuard Security Easy Link EL421 User Manual

4.8.2 Events Settings

The Events page allows you to define the type of events for the DVR to issue an alarm.
1
In preview mode, right-click on the mouse to display the Pop-up menu.
2
Select Main Menu
3
Modify the necessary settings.
Menu Item Description
Event Type Select the event type. Options are:
• Disk Full: When HDD is full.
• Disk Error: If HDD is not detected properly.
• Video Loss: If camera is not detected properly.
Enable Select Enable to issue a notification when the event type occurs.
AlarmOut If an alarm device is connected, check the box to make the device sound the alarm when
the event occurs.
Dwell Time Select the alarm duration (10S/20S/40S/60S).
Show
Check the box to display a message on the screen when the event occurs.
Message
Buzzer Set the buzzer duration when the event occurs (Off/10 S/20 S/40 S/60 S).
To disable buzzer, select Off.
Send Email
Check to enable email alarm notification. If the function is enabled, the system will send
the alarm to the specified email address. See
4
After all settings are complete, click Apply.
5
A warning message appears, click OK to confirm.
6
When data saving is complete, click OK.
> ADVANCED, select the Events tab.
Chapter 4: Using the DVR
"4.4.3 Email Settings" on page 54.
DVR User's Manual
75