Printer Test - Sekonic SR-3500 Operating Manual

Operating tests

Printer test

Printer test
The test characters is printed on the fed sheet and the sheet will be discharged. (This test will
be conducted only when stacker unit and printer unit are installed.)
The number of characters printed varies depending on the printer settings, and character size
and interval settings.
Once reading of the check sheets starts, the test will continue until an error occurs or the
hopper is empty.
Test characters:
" !"#$%&'()*+,−./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[¥]^_
1.
MENU
Press the
2.
UP
Use the and
and press the
3.
UP
Use the and
4.
FEED/ENTER
Press the
(" " mark fl ashes in the fi rst column of the fi rst line on the LCD.)
5.
UP
Use the and
6.
FEED/ENTER
Press the
(The fl ashing " " mark disappears from the LCD, and the test will start/stop.)
7.
Keep pressing the
MENU
or press the
Note)
You cannot return to normal mode while the test is running.
-72-
"
switch to enter the menu mode.
DOWN
switches to select the following parameters,
FEED/ENTER
switch.
DOWN
switches to select [Printer Test].
switch to confi rm the selection and display [Printer Test].
DOWN
switches to select the setting value.
switch to start/stop Printer test.
CLEAR/EXIT
switch until it returns to normal mode,
switch to return to normal mode.
Printer test setting values
• Stop • Start