Setting Paper Hold(Sr-3500) - Sekonic SR-3500 Operating Manual

Setting Paper hold ( SR-3500 )
You can set paper hold setting when using SR-600 operating mode.
When paper hold setting is done, after reading, without discharging the sheet you keep on
the inside of this device.The processing number of cards improves with this operation.(It is
the same operation as SR-3500 mode.) However It cannot maintain compatibility when the
software is kept using with replacing OMR SR-600
1. MENU
Press the
2.
UP
Use the and
and press the
3.
UP
Use the and
and press the
(" " mark fl ashes in the fi rst column of the fi rst line on the LCD.)
4.
UP
Use the and
5.
FEED/ENTER
Press the
(The fl ashing " " mark disappears from the LCD.)
6.
Keep pressing the
or press the
switch to enter the menu mode.
DOWN
switches to select the following parameters,
FEED/ENTER
switch.
DOWN
switches to select [Paper Hold] setting,
FEED/ENTER
switch.
DOWN
switches to set the value.
switch to save the setting value into memory.
CLEAR/EXIT
switch until it returns to normal mode,
MENU
switch to return to normal mode.
Data reading settings Paper hold setting
Paper hold
setting values
• Not use
• Use
-47-