Character Magnifi Cation Setting - Sekonic SR-3500 Operating Manual

Printer settings SR-600,SR-9000 mode
2.
Character magnifi cation setting
Width can be magnifi ed between 1 to 15 times.
Character width = size x magnifi cation
(1) Press the
(2) Use the
and press the
(3) Use the
and press the
(" " mark fl ashes in the fi rst column of the fi rst line on the LCD.)
(4) Use the
(5) Press the
(The fl ashing " " mark disappears from the LCD.)
(6) Keep pressing the
or press the
[Setting example 1]
When the size is set at 3.2mm and magnifi cation is 1.
Character width = 3.2 x 1 = 3.2mm
[Setting example 2]
When the size is set at 3.2mm and magnifi cation is 2.
Character width = 3.2 x 2 = 6.4mm
[Setting example 3]
When the size is set at 4.0mm and magnifi cation is 2.
Character width = 4.0 x 2 = 8.0mm
-58-
MENU
switch to enter the menu mode.
UP DOWN
and switches to select the following parameters,
FEED/ENTER
switch.
DOWN
UP
and switches to select [Magnifi cation] setting,
FEED/ENTER
switch.
UP DOWN
and switches to set the value.
FEED/ENTER
switch to save the setting value into memory.
CLEAR/EXIT
switch until it returns to normal mode,
MENU
switch to return to normal mode.
Character magnifi cation
setting values
1 - 15 (Times)
3.2mm
6.4mm
8.0mm