Standby Duration - Sekonic SR-3500 Operating Manual

Standby duration

1.
MENU
Press the switch to enter the menu mode.
2.
UP
Use the and
FEED/ENTER
and press the
3.
UP
Use the and
FEED/ENTER
and press the
(" " mark fl ashes in the fi rst column of the fi rst line on the LCD.)
4. UP
Use the and
5.
FEED/ENTER
Press the switch to save the setting value into memory.
(The fl ashing " " mark disappears from the LCD.)
6.
Keep pressing the
MENU
or press the switch to return to normal mode.
Note)
(1) Releasing Sleep/Standby mode
Sleep/Standby mode will be cancelled in the following conditions.
• When an operation is entered on the panel screen.
• When a descending command is sent.
• When an error occurs.
• When loading paper on the hopper.
(2) Conditions in which Sleep/Standby mode cannot be attained
Sleep/Standby mode is not available in the following conditions.
• When displaying a menu on the panel screen.
• When an error occurs.
(3) Stacker cover open error cannot be detected in Standby mode.
Low power consumption settings
DOWN
switches to select the following parameters,
switch.
DOWN
switches to select [Time for Standby] setting,
switch.
DOWN
switches to set the value.
CLEAR/EXIT
switch until it returns to normal mode,
Standby duration
Time for Standby
setting values
• None
• 1 - 60 (Minutes)
*Can be set in minute
increments.
-63-