Setting Reading Method - Sekonic SR-3500 Operating Manual

Setting reading method

Setting mark-reading method.
There are six kinds of reading methods: "Top-end timing control type," "Bottom-end timing
control type," "Direct under type," "FACOM," "Mark to mark type (without top-end margin
reading)," and "Mark to mark type (with top-end margin reading)."
When setting to "top-end timing control type" or "bottom-end timing control type," you need
to set a control multiple number.
MENU
1. Press the
UP
2. Use the and
and press the
UP
3. Use the and
and press the
(" " mark fl ashes in the fi rst column of the fi rst line on the LCD.)
UP
4. Use the and
FEED/ENTER
5. Press the
(The fl ashing " " mark disappears from the LCD.)
6. Keep pressing the
or press the
Data reading settings
switch to enter the menu mode.
DOWN
switches to select the following parameters,
FEED/ENTER
switch.
DOWN
switches to select [Reading Method] setting,
FEED/ENTER
switch.
DOWN
switches to set the value.
switch to save the setting value into memory.
CLEAR/EXIT
switch until it returns to normal mode,
MENU
switch to return to normal mode.
Setting reading method
Reading method
setting values
• Control Fore
• Control Back
• Direct
• FACOM
• Mark to Mark
• Mark to Mark
-39-