Table of Contents
Advertisement
Quick Links
Download this manual
See also:
Operating Manual
You will need DataLink Ascend login information to connect the scanner to
DataLink Ascend assessment solution.
Once you receive your scanner, please review this document to get to know the
various parts or the scanner.
You can also view the setup guide that comes with each scanner.
Please refer to the full user manual to access information on other options that
might be purchased with your scanner including barcode, printing, duplex, ink
read, etc.
1. Attach the paper receiver tray to the body of the scanner. (See preparation diagrams
based on the option that you have – No stacker vs stacker)
2. Connect the scanner to the computer that you will be using with the included usb cable.
3. Connect the power chord to the power outlet.
4. Log into DataLink Ascend and select the Scanning menu.
5. Select the "Search for Scanner" button
DataLink Ascend to Sekonic Scanner Setup
Sekonic Maintenance Guide
Sekonic SR3500 / SR6500
Quick Setup Directions
Advertisement
Table of Contents
Related Manuals for Sekonic SR3500
Summary of Contents for Sekonic SR3500
- Page 1 DataLink Ascend to Sekonic Scanner Setup Sekonic Maintenance Guide Sekonic SR3500 / SR6500 You will need DataLink Ascend login information to connect the scanner to DataLink Ascend assessment solution. Once you receive your scanner, please review this document to get to know the various parts or the scanner.
- Page 2 6. Once detected, it should list the type of scanner. 1. If it is not detected, you will have to install the firmware. 7. Adjust the paper tray to the correct size of your assessment answer sheets. 8. Other scanner settings are also available and accessible through the “Scanner Setting” menu after installation has been completed.