Setting Reading Side - Sekonic SR-3500 Operating Manual

Setting reading side

You can set the reading side when the optional back-sided reading unit is installed.
The reading side can be set to either "single side" or "double side."
When reading single-sided sheets, if you set the reading side to "single side," the back side
won't be read.
1. MENU
Press the
2.
UP
Use the and
and press the
3.
UP
Use the and
and press the
(" " mark fl ashes in the fi rst column of the fi rst line on the LCD.)
4.
UP
Use the and
5.
FEED/ENTER
Press the
(The fl ashing " " mark disappears from the LCD.)
6.
Keep pressing the
or press the
switch to enter the menu mode.
DOWN
switches to select the following parameters,
FEED/ENTER
switch.
DOWN
switches to select [Reading Side] setting,
FEED/ENTER
switch.
DOWN
switches to set the value.
switch to save the setting value into memory.
CLEAR/EXIT
switch until it returns to normal mode,
MENU
switch to return to normal mode.
Data reading settings Setting reading side
Reading side
setting values
• Single Side
• Double Side
-43-