Options Stacker Unit; Stacker Unit Specifi Cations - Sekonic SR-3500 Operating Manual

Options Stacker unit

Stacker unit specifi cations
Options
Stacker unit
SR-6500 is equipped with the stacker unit standardly, SR-3500 is equipped with it optionally.
Stacker unit specifi cations
Printing location
Printing method
Number of
characters printed
Kinds of
characters printed
Character size
Character interval
Printing pixels
Printing position
Printing position adjustment
The printable area
2mm (W-4) mm
1: in printing letter kind is printed becoming
2:The number of letters until it stops being printed depend on working condition.
3:The size of printable area depends on the size of the sheet used.
Note)
If a sheet is curled, it may cause a paper jam, so please do not use curly sheet.
-74-
(printer)
Prints on top surface of fed sheet
Inkjet
Maximum 72 characters (for A4-size paper)
Alphabet (uppercase and lowercase letters)
Numbers (0 - 9)
36 Symbols
Japanese kana (including half and full accents,
Height approximately 3mm x width approximately 3.2mm - 6.4mm
Approximately 0.8mm - 92mm
12 vertical x 9 horizontal pixels
2mm or more from standard paper feeding edge to beginning of characters (not extened to timing mark)
2mm or more from right edge of maximum size sheet to beginning of characters
Main scanning direction: Adjust head position manually.
Sub scanning direction: Set print starting position command.
Main scanning direction
Feeding direction
Ink cartridge
3
2mm
3mm
(L-6) mm
3mm
)
Expires: 6 months after opening
Life: about 1 million characters
W
L
Sheet size
1
2