Connecting to a computer
2.
Interface settings
(1)
Press the
(2)
Use the
and press the
(3)
Use the
and press the
(" " mark fl ashes in the fi rst column of the fi rst line on the LCD.)
Set any number using the
(4)
Press the
(The fl ashing " " mark disappears from the LCD.)
(5)
Keep pressing the
or press the
-32-
USB
MENU
switch to enter the menu mode.
DOWN
UP
and
switches to select the following parameters,
FEED/ENTER
switch.
UP
DOWN
and
switches to select the following parameters,
FEED/ENTER
switch to begin [Device ID] setting.
UP
and
FEED/ENTER
switch to save the setting value into memory.
CLEAR/EXIT
switch until it returns to normal mode,
MENU
switch to return to normal mode.
DOWN
switches.
Device ID
setting value
0-126