3.
DOWN
UP
Use the
and
FEED/ENTER
and press the
switch.
(" " mark fl ashes in the fi rst column of the fi rst line on the LCD.)
4.
MENU
DOWN
Use the
and
5.
FEED/ENTER
Press the
switch to save the setting value into memory.
(The fl ashing " " mark disappears from the LCD.)
6.
CLEAR/EXIT
Keep pressing the
MENU
or press the
switch to return to normal mode.
*The hopper table goes up and kept at the upper position if the manual mode is
selected. The hopper dose not go down if the
Data reading settings
switches to select [Wait Time for Form] setting,
switches to set the value.
switch until it returns to normal mode,
DOWN
Setting hopper mode
Wait time for form
setting values
• None
• 1-99S
switch is pressed.
-45-