Low Power Consumption Settings; Sleep Duration - Sekonic SR-3500 Operating Manual

Low power consumption settings

Low power consumption settings
This device can be set to reduce power consumption in standby mode.
The low-power consumption settings make the device automatically reduce power
consumption when it is not used for a certain period.
Sleep mode = low-power consumption condition that it automatically switches to when it is
not used for a set time (sleep duration).
Standby mode = a second low-power consumption condition that it automatically and
continuously switches to after shifting to the sleep mode when it is not used
for a set time (standby duration).
(Power consumption is reduced further than sleep mode.)

Sleep duration

1.
MENU
Press the
2.
UP
Use the and
and press the
3.
UP
Use the and
and press the
(" " mark fl ashes in the fi rst column of the fi rst line on the LCD.)
4.
UP
Use the and
5.
FEED/ENTER
Press the
(The fl ashing " " mark disappears from the LCD.)
6.
Keep pressing the
or press the
-62-
Sleep duration
switch to enter the menu mode.
DOWN
switches to select the following parameters,
FEED/ENTER
switch.
DOWN
switches to select [Time for Power Save] setting,
FEED/ENTER
switch.
DOWN
switches to set the value.
switch to save the setting value into memory.
CLEAR/EXIT
switch until it returns to normal mode,
MENU
switch to return to normal mode.
Time for Power Save
setting values
• None
• 1 - 60 (Minutes)
*Can be set in minute
increments.