Setting Hopper Mode - Sekonic SR-3500 Operating Manual

Data reading settings

Setting hopper mode

Setting hopper mode
Setting the hopper mode for reading sheets.
The hopper mode can be set to either "ADF" or "manual feed."
If you set it to "manual feed," you need to set the sheet insertion waiting time.
1.
MENU
Press the
2.
UP
Use the and
and press the
3.
UP
Use the and
and press the
(" " mark fl ashes in the fi rst column of the fi rst line on the LCD.)
4.
UP
Use the and
5.
FEED/ENTER
Press the
(The fl ashing " " mark disappears from the LCD.)
6.
Keep pressing the
or press the
Set sheet insertion waiting time when "manual feed" is selected
1.
MENU
Press the
2.
UP
Use the and
and press the
-44-
switch to enter the menu mode.
DOWN
switches to select the following parameters,
FEED/ENTER
switch.
DOWN
switches to select [Hopper Mode] setting,
FEED/ENTER
switch.
DOWN
switches to set the value.
switch to save the setting value into memory.
CLEAR/EXIT
switch until it returns to normal mode,
MENU
switch to return to normal mode.
switch to enter the menu mode.
DOWN
switches to select the following parameters,
FEED/ENTER
switch.
hopper mode
setting values
• ADF
• Manual Feed