Warnings - Sekonic SR-3500 Operating Manual

Optical mark reader
Hide thumbs Also See for SR-3500:
Table of Contents

Advertisement

[Stacker unit]
Error
Jam at printer printing
start detection sensor
Jam at main paper
discharge sensor
Jam at selected paper
discharge sensor
2.

Warnings

(1)
Components
Error
Back side reading unit
unconnected
Barcode unit unconnected
Printer unit unconnected
Stacker unit unconnected
(2)
Paper feeding
Error
Sheet empty
Double feed error
Left end skew error
Error displays and countermeasures
Explanation
Code
A paper jam occurred at the
I1
printer printing start detection
sensor.
A paper jam occurred at the
I2
main paper discharge sensor.
A paper jam occurred at the
I3
s e l e c t e d p a p e r d i s c h a rg e
sensor.
Explanation
Code
Back surface reading unit is
P1
not installed.
• Barcode unit is not connected.
P2
• Printer unit is not installed.
P3
• Printer cartridge is not installed.
P4
Stacker unit is not installed.
Explanation
Code
There is no paper in the hopper
Q1
or the internal units.
Two or more sheets were fed
Q2
simultaneously.
Q3
Paper was fed crookly.
Solution
• Remove jammed paper.
• Press the CLEAR switch
( o r e x e c u t e t h e c l e a r e r r o r
command).
• Remove jammed paper.
• Press the CLEAR switch
( o r e x e c u t e t h e c l e a r e r r o r
command).
• Remove jammed paper.
• Press the CLEAR switch
( o r e x e c u t e t h e c l e a r e r r o r
command).
Solution
• C h e c k i f t h e b a c k s i d e
reading unit is installed.
• Press the CLEAR switch
( o r e x e c u t e t h e c l e a r e r r o r
command).
• Check if the Barcode unit is
installed.
• Press the CLEAR switch
( o r e x e c u t e t h e c l e a r e r r o r
command).
• Press the CLEAR switch
( o r e x e c u t e t h e c l e a r e r r o r
command).
• Set printer control invalid.
• Check if the Stacker unit is
installed.
• Press the CLEAR switch
( o r e x e c u t e t h e c l e a r e r r o r
command).
Solution
Press the CLEAR switch
(or execute the clear error command).
Press the CLEAR switch
(or execute the clear error command).
Press the CLEAR switch
(or execute the clear error command).
-113-

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sr-6500

Table of Contents