Character Size Setting - Sekonic SR-3500 Operating Manual

Printer settings SR-3500,SR-6500 mode
SR-3500,SR-6500 mode
Character size setting ................................................... P.54
Character interval setting .............................................. P.55
• See P.54 and subsequent pages for SR-3500,SR-6500 mode.
SR-600,SR-9000 mode
Character size setting ................................................... P.57
Character magnifi cation setting .................................... P.58
Character interval setting .............................................. P.59
• See P.57 and subsequent pages for SR-600,SR-9000 mode.
SR-3500,SR-6500 mode
1.

Character size setting

The width of a character can be increased in 0.8mm increments between 3.2mm
and 6.4mm.
No.
1
2
3
4
5
(1) Press the
(2) Use the
and press the
(3) Use the
and press the
(" " mark fl ashes in the fi rst column of the fi rst line on the LCD.)
-54-
Size (a)
3.2mm
4.0mm
4.8mm
5.6mm
6.4mm
MENU
switch to enter the menu mode.
DOWN
UP
and switches to select the following parameters,
FEED/ENTER
switch.
UP DOWN
and switches to select [Size] setting,
FEED/ENTER
switch.
About 3mm
a